Sludge Cleaning Sludge Scraper

Sludge Cleaning Sludge Scraper

Our factory produces the Sludge Cleaning Sludge Scraper, which is used for continuous collection and discharge of sludge from the bottom of sedimentation tanks, thickening tanks, or clarification tanks. This equipment solves the problems of automatic sludge removal failure, low manual cleaning efficiency, and associated safety risks.
Send Inquiry
Description

Shandong Ningye Machinery Equipment Co., Ltd. is one of the leading manufacturers and suppliers of sludge cleaning sludge scraper in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please feel free to buy durable sludge cleaning sludge scraper at low price from our factory.

 

Product Overview

Our factory produces the Sludge Cleaning Sludge Scraper, which is used for continuous collection and discharge of sludge from the bottom of sedimentation tanks, thickening tanks, or clarification tanks. This equipment solves the problems of automatic sludge removal failure, low manual cleaning efficiency, and associated safety risks.

product-1500-1500
product-1500-1500

 

Equipment Composition

 

 

The machine consists of the following parts:

Drive unit: motor and gearbox, providing torque for scraper rotation.

Top shaft connection: connects the drive unit to the scraper arms and transmits rotational power.

Scraper arms and blades: designed according to the tank bottom slope. The blades stay close to the tank bottom, scraping sludge toward the center or side discharge hopper.

Central or side discharge hopper: collects the scraped sludge.

Overload protection device: mechanically or electrically cuts off power when the blades encounter large debris or excessive sludge, preventing damage.

Underwater support or center bearing: keeps the main shaft vertical and stable.

Control panel: provides start/stop control, speed adjustment (if required), and overload alarm.

 

Working Principle

 

 

The equipment rotates slowly and continuously, driving the scraper arms around the tank center. The scraper blades push sludge settled at the bottom along the tank slope toward the discharge outlet, where sludge is removed by hydrostatic pressure or a discharge pump. A defined clearance is maintained between the blades and the tank bottom to avoid damaging the tank structure.

 

Main Technical Parameters (Standard specifications, customizable)

 

 

Tank diameter range

2m – 30m

Scraper rotation speed

0.5 – 3 r/min (adjustable based on tank diameter and sludge characteristics)

Motor power

0.37kW – 5.5kW

Blade linear speed

1 – 3.5 m/min

Applicable sludge solids content

0.5% – 15%

Working medium temperature

0°C – 60°C

Tank bottom slope

1:10 – 1:15 (customizable to match tank type)

 

Typical Applications

 

 

Wastewater treatment plants:

primary and secondary sedimentation tanks.

Industrial wastewater treatment:

sedimentation tanks in metallurgical, chemical, printing/dyeing, and food industries.

Drinking water plants:

sludge collection at the bottom of flocculation sedimentation tanks.

Other solid-liquid separation processes:

round or square tanks requiring periodic removal of thick settled solids (square tanks require a reciprocating scraper).

 

Structural diagram

product-1500-951

 

Product Advantages

 

 

Stable continuous operation:

heavy-duty gearbox and main shaft prevent tooth skipping or deflection during long-term operation.

Thorough sludge removal:

segmented adjustable blades match the actual tank bottom slope, leaving a residual sludge layer below 5mm.

Reliable overload protection:

shear pins or torque limiters respond quickly to prevent equipment damage.

Easy maintenance:

scraper arms are flange-connected; replacing blades does not require full disassembly. Underwater bearings use wear-resistant nylon or copper alloy with a service life of more than 2 years.

Corrosion resistance:

underwater parts are made of 304 stainless steel or carbon steel with hot-dip galvanizing (environmentally friendly). Rubber lining or duplex stainless steel is available upon request.

Low energy consumption:

low rotation speed and low operating current. Daily power consumption typically does not exceed 15 kWh (for a 12m diameter tank).

 

Installation and Operation Requirements

 

 

  • The tank bottom must be flat, with radial height deviation within ±3mm/m.
  • No protruding obstacles within 50cm in front of the discharge outlet.
  • Before first use, run the machine without load for 2 hours to confirm no scraping or abnormal noise between the scraper arms and the tank bottom.
  • During operation, check for sudden changes in drive current every shift. Add grease to bearings every 3 months.

 

Information Required for Selection

 

 

To provide you with accurate specifications, please supply the following:

Sedimentation tank diameter and depth

Tank bottom structure (flat bottom, conical bottom, or sludge hopper)

Type of medium (municipal sludge, chemical sludge, sand-containing water, etc.)

Sludge discharge method (hydrostatic or pump)

Explosion-proof or special corrosion protection requirements

 

Quality Control and After-Sales Service

 

 

△ Each machine undergoes a 48-hour full-load test before delivery, along with a test report and concentricity inspection record.

△ 12-month warranty for the complete machine; 18-month warranty for the main shaft and gearbox.

△ Vulnerable underwater parts (blades, bearing bushings) are stocked year-round. Shipment within 24 hours after receiving the order.

△ Technical personnel can be dispatched to guide installation and provide operation training.

 

FAQ

 

 

1. Q: Is the equipment noisy during operation?

A: No. Normal operation noise is below 75 decibels, mainly from the gearbox. If there is obvious knocking or sharp friction sound, the machine needs to be stopped for inspection.

2. Q: Can the scraper run intermittently, or must it run continuously?

A: It can run intermittently. For tanks with low sludge volume, 4 to 8 hours of operation per day is sufficient. However, we recommend that each shutdown period does not exceed 8 hours to prevent sludge from hardening and causing restart difficulty.

3. Q: What daily maintenance does the equipment require, and how often?

A: Check the current stability once per week. Add grease to the bearings once per month. Check scraper blade wear once per quarter; replace when wear exceeds one third of the original thickness. Check main shaft straightness once per year.

4. Q: Do you provide remote technical support?

A: Yes. Through video calls or site photos, we can remotely diagnose the fault and guide the fix. Most electrical and mechanical issues can be resolved remotely within 30 minutes.

 

Hot Tags: sludge cleaning sludge scraper, China sludge cleaning sludge scraper manufacturers, suppliers, factory, Integrated Sludge Scraper And Suction Machine, Sedimentation Tank Sludge Scraper, Sludge Cleaning Sludge Scraper, sludge scraper, Vertical Frame Central Drive Sludge Scraper, Wastewater Treatment Sludge Scraper

Send Inquiry